GREEN POWER SCIENCE STIRLING ENGINE AND A FRESNEL LENS 1800 RPMS. HAD TO STOP AS ENGINE HEAT SHAFT WAS GETTING TOO HOT. This stirling engine converts heat into kinetic free energy from the sun.
A Stirling engine is a heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. Or more specifically, a closed-cycle regenerative heat engine with a permanently gaseous working fluid, where closed-cycle is defined as a thermodynamic system in which the working fluid is permanently contained within the system, and regenerative describes the use of a specific type of internal heat exchanger and thermal store, known as the regenerator. It is the inclusion of a regenerator that differentiates the Stirling engine from other closed cycle hot air engines.
Originally conceived in 1816 as an industrial prime mover to rival the steam engine, its practical use was largely confined to low-power domestic applications for over a century.
The Stirling engine is noted for its high efficiency compared to steam engines, quiet operation, and the ease with which it can use almost any heat source. This compatibility with alternative and renewable energy sources has become increasingly significant as the price of conventional fuels rises, and also in light of concerns such as peak oil and climate change. This engine is currently exciting interest as the core component of micro combined heat and power (CHP) units, in which it is more efficient and safer than a comparable steam engine.[
Views:385595|Rating:4.89|View Time:8:49Minutes|Likes:13702|Dislikes:294 Easy Quote & Order Online ($2 for 10 boards):
Photovoltaic Off-Grid System:
Support me for more videos:
Mini Pan Tilt from Thingiverse:
More project information (code, schematic, parts list,…..) on Instructables:
Parts list (incomplete, see Instructables for more, affiliate links):
1x Arduino Nano:
2x SG90 Servo:
4x 1kohm Resistor:
1x Arduino Nano:
2x SG90 Servo:
4x 1kohm Resistor:
In this project I will show you how to create a solar tracker which like the name implies can follow the movement of the sun throughout the day. And at the end I will show you the energy harvest difference between a solar tracker mounted solar panel and a flat mounted solar panel.
Thanks to JLCPCB for sponsoring this video
Visit to get professional PCBs for low prices
2011 Lookalike by Bartlebeats
Ecstatic Wave, Jens Kiilstofte
Views:459981|Rating:4.31|View Time:2:46Minutes|Likes:1672|Dislikes:269 If you live in an area that is prone to disasters and you usually suffer from long power cuts or grid failures or in case your finances are being really hurt by the electrical bills you have to pay, you should be aware of a new invention that is now available so that all of us can benefit from it. The Power Innovator Program e-book and video tutorial will help us save a lot of money by helping us create our own electricity generation device. That is correct! You will be able to produce your own electricity at home.
The Power Innovator Program PDF guidebook consists of a program that will guide you to your own electrical independence. Have you ever thought that something like this was possible? The ridiculous expensive charges that electrical corporations charge us can now be replaced by a small device that you will create and it will help you save up to 80% or more on your electrical bill. The device can be carried around as it is actually very small and can be used to power anything, from small devices like a radio to big devices such as a fridge. You can even update your device so that it can power up your own house. You will be effectively saving hundreds of dollars!
This is a highly effective program, relatively cheap, that will teach you build your own power generator device. You will only have to invest between $50 to $80 in order to buy the different pieces you need. This price is nothing compared to the hundreds of dollars you will save from now on. These pieces and parts can be easily acquired from any electrical store next to your location.
The Power Innovator Program Details
The new program was designed by Prof. Richard Goran, based on Nikola Tesla´s design and invention. The Power Innovator Program e-book is an easy to read and follow step by step guide that will enable you to build the power generation device in less than two hours, if you have a helping hand. The guidebook and the highly detailed tutorial will teach you what a Bifilar Pancake Protocol is and how to do it yourself. Although this knowledge has been available for more than a hundred years, it was actually not ready to be prepared by a single individual.
The bifilar coil, or Tesla coil as it is commonly referred to, is the soul and secret of this project. It has so much power that you should not build a new one for years as it can last for a long time. It can boost five times more electricity for the devices you have at home. You should not worry about power cuts and grid failures anymore!
Download The Power Innovator Program now to get instant access to this revolutionary device that will put an end to your electricity cravings. The invention can be easily constructed at home with no risk whatsoever, as it is perfectly safe to produce.
This is a unique system that will grant you a huge deal of electrical independence. You will save more than 80% from your bill every month. It can be built with simple materials with a cost as low as $100. It will work all year long, and much more, so that you do not have to worry or keep investing money on it. More than 30.000 families have already benefited from this product. Now it is your turn!